Bitstream MAGNETAR-105 Skrócona instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Router sieciowy Bitstream MAGNETAR-105. Bitstream MAGNETAR-105 12 stron. Wireless ethernet router 2g/3g/4g/ rs232/422/485/ i/o usb measurement interfaces
Drukuj stronę
Quick manual
The number of RS ports depends on the device version, usually the first two are RS-232
other RS2232 / 422/485 (2W / 4W)
TCP mode
'Server' - this is the host operating mode in the IP network as passive, which is assigned
to the local IP address and TCP port number. The remote host 'Client' initiates contact
with the serial port, establishing a connection with 'Server', and then can send and
receive data.
'Client' - this is the active mode of the host in the IP network, which is assigned to the
local IP address and TCP port number, which can actively establish a TCP connection to
the configured host as the 'Server' based on the IP address and TCP port. Once the
connection is established, data is sent and received.
localhost
Set the IP address in the case of the 'Client' mode
REV.
1.03
* - IO port functionality implemented according to specific customer requirements.
Configuration of the RS serial port
RS Type configuration
Test loops
MANUAL Magnetar-105
www.bitstream.pl
2020.06.08
11/12