Samsung 400MXN - SyncMaster - 40" LCD Flat Panel Display Skrócona instrukcja obsługi - Strona 17

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Monitor Samsung 400MXN - SyncMaster - 40" LCD Flat Panel Display. Samsung 400MXN - SyncMaster - 40" LCD Flat Panel Display 22 stron. Quick guide (korean)
Również dla Samsung 400MXN - SyncMaster - 40" LCD Flat Panel Display: (Skrócona instrukcja obsługi (22 strony), (Francuski) Skrócona instrukcja obsługi (22 strony), (Koreański) Skrócona instrukcja obsługi (21 strony)

2) Maintaining the Flat Panel Display Screen.

Clean with a soft cloth (cotton flannel) smoothly.

Symptoms and Recommended Actions

Note

A LCD Display recreates visual signals received from the computer. Therefore, if there is a problem

with the computer or the video card, this can cause the LCD Display to become blank, have poor

coloring, become noisy, and video mode not supported, etc. In this case, first check the source of the

problem, and then contact a Service Center or your dealer.

Check if the power cord and the video cables are properly connected to the computer.

Check if the computer beeps more than 3 times when booting.

(If it does, request an a service for the main board of the computer.)

If you installed a new video card or if you assembled the PC, check if you installed the Adaptor

(video).

Check if the scanning ratio of the video screen is set to between 50 Hz ~ 85 Hz.

(Do not exceed 60Hz when using the maximum resolution.)

If you have problems in installing the Adaptor (video) driver, boot the computer in Safe Mode,

remove the Display Adaptor in the "Control Panel −> System −> Device Administrator" and then

reboot the computer to reinstall the Adaptor (video) driver.

Note

•

The following table lists possible problems and their solutions. Before calling for assistance, check

the information in this section to see if you can remedy any problems for yourself. If you do need

assistance, please call the phone number on the Information section or contact your dealer.

•

For more network-related information, refer to the MagicInfo Troubleshooting section.

Note

Problems related to the LCD Display installation and their solutions are listed.

The LCD Display screen flickers.

Troubleshooting

•

Do not use benzene, thinner or other flammable substan-

ces, or a wet cloth.

•

We recommend that a SAMSUNG cleansing agent is used

to prevent damage to the screen.

•

Never use acetone, benzene or thinner.

(They may cause flaws or deformation of the screen sur-

face.)

•

The user will be required to pay costs and related expenses

for repairing damages caused.