Siemens SIWAMAT XT 1050 Instrukcja obsługi - Strona 32

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Siemens SIWAMAT XT 1050. Siemens SIWAMAT XT 1050 40 stron.

Cleaning water inlet

strainers

Cleaning the strainer at the

water tap

Cleaning the strainer on the

washing machine

This is necessary if very little or no water flows into the

washing machine.

First release the water pressure in the supply hose:

Turn off the water tap.

Turn the programme selector to any programme

(except Spin 4" and Pumping").

Press the " button, and allow the programme to

run for approx. 40 seconds.

Disconnect the hose from the water tap.

Rinse the strainer under flowing water.

Reconnect the hose.

Disconnect the hose from the back of the washing

machine.

Pull out the strainer and rinse under running water.

Insert the strainer and reconnect the hose.

Turn on the water tap and check whether water is

still discharged. If water is still discharged, check

that the strainer is attached properly.

Turn off the water tap.