Siemens EH Series Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob Siemens EH Series. Siemens EH Series 16 stron.
Również dla Siemens EH Series: Instrukcja obsługi (34 strony), Instrukcja instalacji i użytkowania (20 strony), Instrukcja obsługi (24 strony), Podręcznik użytkownika (20 strony)
Automatic programming
If the previous setting from 1 to 5 is pressed in the
programming panel, the cooking time is reduced by one
minute, if it is held down the time is automatically reduced to
one minute.
If the previous setting from 6 to 10 is pressed in the
programming panel , the cooking time is increased by one
minute, if it is held down the time is automatically increased to
99 minutes.
Changing or cancelling the time
Press the
symbol several times until the required
0
indicator lights up. Change the cooking time in the
programming panel, or set to
Once the time has elapsed
The hotplate switches off. An audible signal sounds and
appears in the time program function display for 10 seconds.
The
indicator lights up. Pressing the
x
indicators and stops the signal.
Notes
If a cooking time has been programmed in several zones, it
■
can be set to display all time values. To do this, press the
symbol several times until the
hotplate lights up.
Cooking times of up to 99 minutes can be programmed.
■
Cleaning lock function
Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
symbol. A signal sounds. The control panel is
#
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
flash alternately.
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator
Function
Childproof lock
™‚
‹
Deactivated.*
‚
Activated.
Audible signals
™ƒ
‹
Confirmation and error signals deactivated.
‚
Only confirmation signal deactivated.
ƒ
All signals activated.*
Automatic programming of cooking time
™†
‹
Switched off.*
‚
-
ŠŠ
Automatic shut-off time.
*Factory settings
x
.
‹‹
symbol turns off the
0
x
indicator for the required
and
"
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
Programming
Press the
0
1.
up.
lights up in the time program function display.
‹‹
Select the desired time in the programming panel.
2.
The timer starts to count down after a few seconds.
Changing or cancelling the time
Press the
0
symbol several times until the
up. Change the cooking time in the programming panel, or set
to
‹‹
.
‹‹
Once the time has elapsed
A warning beep sounds. In the time program function display
‹‹
is shown, and the
the indicators turn off.
Pressing the
0
beep.
0
locked for 35 seconds. The surface of the control panel can
now be cleaned without risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
‰
symbol several times until the
W
indicator comes on. After 10 seconds
symbol turns off the indicators and stops the
indicator lights
W
W
indicator lights
11