ActronAir MRE-050AS Instrukcja instalacji i konfiguracji - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja instalacji i konfiguracji dla Akcesoria do klimatyzatorów ActronAir MRE-050AS. ActronAir MRE-050AS 20 stron. Ultraslim ducted, bulkhead ducted and cassette systems
Drukuj stronęInstallation Guide
4. Within 8 minutes of power being reset,
press the LED button on the remote
control 7 times - this will initiate access
point mode and allow your phone to
link with the Easyconnect app setup
process.
Ensure the remote control is pointed at
the appropriate receiver:
Cassettes (CRE) – Receiver on the
indoor unit fascia.
Ducted (LRE/BRE) – Remote receiver
PCB connected to the indoor unit
(Port CN10) on unit commissioning.
(Appendix A on Page 19)
If no receiver is located on the indoor
unit it can be purchased as a spare part
LRE13016B .
NOTE
Access Point mode is indicated by the
white LED on the smart port flashing.
3. Power the Air conditioner off from the
power supply for 15 seconds, then back
on again.
Installation Guide - Easyconnect App
Document: 9590-4009 Ver. 2 201126
Easyconnect App
13