ACU-RITE 00815 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Stacja pogodowa ACU-RITE 00815. ACU-RITE 00815 12 stron. Weather forecaster

Drukuj stronę

Troubleshooting

Problem

No outdoor sensor

reception

no bars

Outdoor

temperature

is flashing or

showing dashes

Inaccurate

temperature

or humidity

Inaccurate forecast

Display screen

not working

If your AcuRite product does not operate properly after trying

the troubleshooting steps, visit www.AcuRite.com or call

(877) 221-1252 for assistance.

If the wireless signal indicator shows no bars:

• Relocate the display and/or the outdoor sensor.

The units must be within 165 ft (50 m) of each other.

• Make sure both units are placed at least 3 feet

(.9 m) away from electronics that may interfere with

the wireless communication (such as TVs, microwaves,

computers, etc).

• Use standard alkaline batteries (or lithium batteries

in sensor when temperature is below -4ºF/-20ºC). Do

not use heavy duty or rechargeable batteries. NOTE:

It may take a few minutes for display and sensor to

synchronize after batteries are replaced.

Flashing of the outdoor temperature is generally an

indication of wireless interference.

1. Bring both the sensor and display indoors and

remove at least one battery from each.

2. Reinstall the battery in the outdoor sensor.

3. Reinstall the battery in the display.

4. Let the units sit within a couple feet of each other for

a few minutes to gain a strong connection.

• Make sure both the display and sensor are placed out

of direct sunlight and away from any heat sources or

vents (see page 6).

• Make sure both units are positioned away from

moisture sources (see page 6).

• The Weather Forecast icon predicts conditions for the

next 12 to 24 hours, not current conditions.

• Has Learning Mode icon disappeared from the

display? Learning Mode must complete before

forecast and pressure will be accurate.

• Allow unit to run continuously for 33 days. Battery

removal or resetting the display will restart Learning

Mode. After 14 days, forecast should be fairly

accurate, however Learning Mode calibrates for a

total of 33 days.

• Check that the batteries are installed correctly.

Batteries may need to be replaced.

Possible Solution