Epson CX9400Fax - Stylus Color Inkjet Podręcznik Start Here - Strona 18

Przeglądaj online lub pobierz pdf Podręcznik Start Here dla Wszystko w jednej drukarce Epson CX9400Fax - Stylus Color Inkjet. Epson CX9400Fax - Stylus Color Inkjet 24 stron. Supplemental / late breaking information
Również dla Epson CX9400Fax - Stylus Color Inkjet: Podręcznik (17 strony), Podręcznik Start Here (8 strony), Specyfikacje (2 strony), Skrócona instrukcja obsługi (48 strony), Podręcznik Start Here (9 strony), Aktualizacja (1 strony), Uzupełnienie (1 strony)

Solving Problems

Check the solutions below if you're having trouble installing your all-in-one.

The print server can't be found

■

Make sure that the print server is turned on and connected correctly.

■

Make sure the antenna is connected to the print server and that it is upright.

■

Make sure that your computer and print server are connected to the wireless

access point. If the print server finds another access point with the same SSID

as your access point, you should personalize your SSID to avoid potential

conflicts.

■

Make sure that the print server is connected to your network with the

included Ethernet cable during the installation.

■

If you have a software firewall installed on the computer you want to print

from, you need to grant full network access to the Edimax software. If

necessary, open TCP port 14135 and UDP ports 69, 13364, 13621, 13878,

and 14135 in your firewall software. See your firewall documentation for

details.

The print server doesn't find a wireless network

■

Make sure your access point is set to broadcast its SSID. If it is hidden, you

will not be able to select it when installing the print server.

■

Make sure the antenna is connected to the print server and that it is oriented

correctly.

■

Make sure that the print server is within range of the wireless access point.

The print server can see the network, but can't connect to it

■

Make sure that your computer and print server are connected to the same

wireless access point. If the print server finds another access point with the

same SSID as your access point, you should personalize your SSID to avoid

potential conflicts.

■

Make sure that your wireless access point is set to use one of the print server's

supported security settings: None, WEP 64, WEP 128, or WPA-PSK.

■

If your wireless access point has security enabled, make sure that you entered

the correct security key or passphrase.

Solving Problems