ACE CAM A16 Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Aparat cyfrowy ACE CAM A16. ACE CAM A16 15 stron.

4. Parking Monitor

When you park your vehicle, you can turn on the parking monitor function to

make the dvr camera record while parked to avoid (or record and provide evidence)

any damage to your car like attempted theft, scratching, or denting. Please note

that there is only a limited charge in your camera for these recordings; to extend the

availability of parking recordings, you can buy an external power connector so your

dash cam will remain fully powered.

Reminder: all car dvr recorders have small batteries inside and will only record

for 2-3 minutes without active recharging. Ideally the parking monitor function

will be used with a direct power connection to the vehicle battery.

Operation Guide

1. Power On/Off: Continually press (hold) the power button for 2~3 seconds to

turn the dvr on & off.

If have a storage card already inserted, once the dashcam is on it will enter

into recording mode automatically.

2. Start/Stop recording: In video mode, press the OK button quickly (short

press) to start recording. Press it once again, and the recording will be

stopped.

3. Photo: In photo mode, quickly press the OK button to take a photo.

4. Playback: In playback mode, quickly press the OK button to play the video.

5. OK button: In video mode/photo mode/playback mode, short press the

MENU button to enter the menu screen. Quickly press UP/DOWN to browse,

and quickly press the OK button to select an option.

6. Up button: In menu setting and camera switching mode, it is an up

function. In video recording mode, quickly press the up button to switch

on / off sound (audio) recording.

7. Down button: In menu setting and camera switching mode, it is a down

function. In video recording mode, quickly press the DOWN button to switch

on/off emergency lock, hold the down button to switch rear and front camera

image display.