Sony 2005 SXRD KDS-R50XBR1 Instrukcja demontażu - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja demontażu dla TV Sony 2005 SXRD KDS-R50XBR1. Sony 2005 SXRD KDS-R50XBR1 31 stron.

Chapter 2 - Rear & Sub Plastic Cover Removal
Screws
Bracket
CN2006
CN2010
Rear and Sub Plastic Cover Removal & ASU-Board Access
Screws
Disconnect
fan cable
behind cover
Screws
Release Wire Tie
CN2100
Detach
AC Cord
Shields
S1-Board
4
1
Remove 9 screws and pull rear
plastic cover straight back and
off.
Remove 5 screws and detach
AC cord from the slot . Pull sub
2
plastic cover slowly straight
back and off.
NOTE:
Be careful of fan wire
and connector behind sub-
cover. Disconnect fan cable to
completely remove cover.
3
Remove 4 screws and release
the one wire tie. Slide the
bracket up slightly and pull off.
Disconnect the S1-Board
Remove both shields to access
the ASU-Board.
4
The ASU-Board can be probed
for troubleshooting at this point
of the disassembly process. It
can not be remove at this point .
Reference "ASU & G-Board
Removal" section.