Cisco TelePresence IX5200 Pierwsza konfiguracja - Strona 30
Przeglądaj online lub pobierz pdf Pierwsza konfiguracja dla System konferencyjny Cisco TelePresence IX5200. Cisco TelePresence IX5200 40 stron.
Również dla Cisco TelePresence IX5200: Skrócona instrukcja obsługi (15 strony), Podręcznik użytkownika (26 strony), Instrukcja instalacji (36 strony)
Drukuj stronę
Performing First-Time Setup
Continue to the microphone connector test. Sit in front of a mic bar. Speak into one side of a mic bar
Step 10
(there are two segments to a single mic bar), or lightly scratch one side of a mic bar with your fingernail.
Icons on the screen light up and indicate the mic bar that is being activated.
Click Continue. Repeat this test for every mic bar segment (six in total for the first row, 12 in total for
Step 11
the second row). If you detect any problems, click Exit Setup and check the microphone cabling between
the mic bar, TDM, and Host CPU codec.
Tip
If the problem affects all mic bars, check the cabling between the TDM and the codec (the TDM is
located in the first and, if applicable, second row cable management panels). If the problem is with a
single mic bar, check the cabling between the mic bar and the TDM.
The Audio components are not hot pluggable. If you need to change working connections, you need to
Note
reboot the IX system and run the first-time setup again.
Cisco TelePresence IX5000 and IX5200 First-Time Setup
30
OL-27038-01