Cisco TelePresence System Codec C90 Podręcznik dla początkujących - Strona 16

Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla System konferencyjny Cisco TelePresence System Codec C90. Cisco TelePresence System Codec C90 46 stron. Telepresence system
Również dla Cisco TelePresence System Codec C90: Podręcznik użytkownika (44 strony), Podręcznik (25 strony), Podręcznik dla początkujących (42 strony), Instrukcja rozwiązywania problemów (37 strony), Instrukcja instalacji (2 strony), Podręcznik użytkownika (48 strony)

Drukuj stronę
Cisco TelePresence System Codec C90 Podręcznik dla początkujących
Cisco TelePresence Video Systems
Contents

Setting date, time and location

(When not set by a provisioning system)
You should check that the date and time settings are correct
when you set up your video conference system. The system
uses this information for example to time stamp messages
transmitted to gatekeepers and other network elements.
You can find the time in the top right corner of the Touch
controller display.
Back to task overview
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Introduction
User interfaces
1. Tap the user name in the upper left corner and tap
> Date, Time &
2. Tap
24h
or
3. Tap dd.mm.yy,
Format
you prefer.
4. Select the
of available zones by tapping the - or + signs.
5. Set
Date & Time Mode
be regularly updated; otherwise, select Manual.
a. If you select Manual, enter the correct value for Hour,
Minute, Year, Month, and Day. Tap the - and + signs to
increase or decrease a value.
b. If you select Auto, the NTP server address can be
automatically obtained from the network (set the
Mode
yourself (set
6. Tap
Save
to confirm the changes, or
saving.
7. Tap
Exit
to return to the home menu.
Configuration
Configuration
Settings
Location.
12h
to select the
Time Format
you prefer.
mm.dd.yy
or
yy.mm.dd
to select the
OlsonZone
for your system. Step through the list
to
Auto
if you want time and date to
to Auto) or you can enter the
NTP Server
address
NTP Mode
to Manual).
Undo
to leave without
16
Appendices
Date
NTP
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Contacts