Sony PXW-FS7 Aktualizacja instrukcji - Strona 12
Przeglądaj online lub pobierz pdf Aktualizacja instrukcji dla Aparat cyfrowy Sony PXW-FS7. Sony PXW-FS7 13 stron. Getting s-log output
Również dla Sony PXW-FS7: Podręcznik (28 strony), Podręcznik (36 strony), Instrukcja obsługi (1 strony), Podręcznik (2 strony), Podręcznik (10 strony)
Drukuj stronę
Update the System Software
4. Select "Execute"
Caution
Between version update Phase1 and Phase2, the camera will reboot and the message on the
screen will disappear. Although the message disappears from the screen, version update is
still running, do not turn the power off.
Once the version up is completed, the REC lamp will stop blinking and [Version Upgrade OK
段階
目安の所要時間
Turn Power Off] will appear on the screen.
Phase1
If the upgrade process has not completed after 30 minutes have elapsed in Phase 1 or 60
Phase2
minutes have elapsed in Phase 2, disconnect and reconnect the AC adaptor. After the
camcorder restarts normally, perform the procedure again from step 1.
When the Version Update Procedure is Terminated
If there is a error during the version update, [Version Upgrade NG: Cannot Read. Power
Off] will appear on the screen. Reboot the camera and redo the whole process from the
beginning.
When the Version Update Failed
[Version Upgrade Error!!] will appear on the screen. Redo the whole process from the
beginning. If the error still appears, camera might need repair, please contact your local
Sony service center.
約3分
約9分