Sony MHC-V02 Instrukcja serwisowa - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla System stereo Sony MHC-V02. Sony MHC-V02 38 stron.
Drukuj stronę
2-6.
FRONT PANEL (VITO) SECTION
3 All bosses are removed while moving
jig in the direction of the arrow, and
front panel (VITO) section is removed.
2 Insert the jig into a space and slowly
remove the front panel (VITO) section.
Note 1: When using a jig, please work
so as not to injure front panel
(VITO) section and speaker
cabinet.
total thirteen bosses
2 Insert the jig into a space and slowly
remove the front panel (VITO) section.
Note 1: When using a jig, please work
Push the protrusion, and
remove the terminal
(wide side) [blue].
top side
protrusion
loudspeaker
4cm (tweeter)
(L-CH) (SP1)
Push the protrusion, and
remove the terminal
(narrow side) [blue/black].
top side
protrusion
Push the protrusion, and
remove the terminal
(wide side) [red].
so as not to injure front panel (VITO)
section and speaker cabinet.
5 terminal (narrow side)
[blue/black]
5 terminal
(wide side) [blue]
Push the protrusion, and
remove the terminal
(narrow side) [red/black].
loudspeaker 4cm
(tweeter) (R-CH) (SP2)
1 one screw
((1) (3.5
14), TAPPING)
3 All bosses are removed while moving
2 Insert the jig into a space and slowly
6 terminal
(narrow side)
[red/black]
6 terminal
4 Remove the
front panel (VITO) section
in the direction of an arrow.
7 front panel (VITO) section
Note 2: When installing the front panel (VITO) section,
remove the used glue and apply a new
glue to fix the front panel.
MHC-V02
jig in the direction of the arrow, and
front panel (VITO) section is removed.
remove the front panel (VITO) section.
Note 1: When using a jig, please work
so as not to injure front panel
(VITO) section and speaker
cabinet.
(wide side) [red]
13
SYS SET