ACU-RITE SENC 150 Instrukcja instalacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Konwerter mediów ACU-RITE SENC 150. ACU-RITE SENC 150 8 stron. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Również dla ACU-RITE SENC 150: Podręcznik referencyjny (20 strony), Instrukcja instalacji (4 strony), Instrukcja instalacji (6 strony), Instrukcja obsługi (12 strony)
Drukuj stronęSENC 150
Cross Feed Installation ...
* Supplied with encoder hardware
Leveling block
(2)
1/4-20 x 1/2"
SHSS (2 per block)
1/2" Standoff (4)
ENC 150 Encoder
* 8-32 x 5/8" SHCS (2)
Low head screw
Mounting Information...
These instructions are for mounting the SENC 150
encoder to the cross feed on a vertical knee mill.
Before proceeding:
Please read the Procedure completely.
Mount X axis prior to installing the cross feed.
Clean the mounting surfaces.
Save the alignment brackets with the Encoder
Reference Manual after installation is completed.
First Steps ...
Machine
Move the table to it's far left travel.
Move the saddle to it's center of travel, include
the longitudinal scale thickness.
Mark the axis so that it can be re-centered easily.
P.N. 385072-222 Ed B 11/05
Spar
1/4-20 x 2" BHCS (2)
Encoder
Center reading head ...
•
Installation Manual 385072-45
1
Encoder Installation Manual For: Vertical Knee Mill
Cross Feed Y Axis on Right Hand Side
Reading head mtg. plt.
* M6 flat washer (2)
.017" thick
Unpack encoder in a safe, convenient location.
Do not remove the reading head alignment
brackets until instructed.
Alignment bracket (2)
Mark the center location on the scale case. Slide
the reading head and brackets along the scale case
until the center marks on the scale case and
reading head are aligned.
10-24 x 5/8" BHCS (2)
1/4" Flat washer
.09" thk. (4)
*1/4-20 x 1"
BHCS (2)
Vertical side
bracket
Horizontal
extension
bracket
1/4-20 x 3/4"
BHCS (2)
Align center marks
Acu-Rite Companies Inc.