Cisco PIX 501 Skrócona instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy Cisco PIX 501. Cisco PIX 501 18 stron. Data sheet
Również dla Cisco PIX 501: Skrócona instrukcja obsługi (20 strony), Arkusz danych (8 strony), Skrócona instrukcja obsługi (21 strony), Skrócona instrukcja obsługi (20 strony)

(Optional) Configuration Changes

The PIX 501 is manufactured with a default configuration that meets the needs of most broadband

networking environments. The default configuration enables a DHCP client on the outside interface

and a DHCP server with a predefined IP address pool on the inside interface. For most users,

additional configuration of the PIX 501 is not necessary.

There are only a few instances when it might be necessary to change the default configuration:

• To create administrative and Telnet passwords

• To configure a static IP address for an outside interface

• To upgrade to a DES or 3DES encryption software license

• To upgrade the user license from 10 to 50 users

• To restore the default configuration

Administrative Access

There are three ways to modify the default configuration:

• PDM—Use a web browser to run PDM.

• Console—Use a serial terminal emulator from a PC or workstation connected to the Console port

for local administrative access.

• Telnet—Use PDM or a console to configure Telnet access to the PIX 501. By default, Telnet access

is not permitted. To Telnet to the PIX 501 from the outside perimeter of the firewall, configure an

outside IP address and IPSec for a secure Telnet session. For more information, refer to the

Cisco PIX Firewall and VPN Configuration Guide.