Cisco TelePresence Server 7010 Instrukcja wymiany - Strona 21
Przeglądaj online lub pobierz pdf Instrukcja wymiany dla Sprzęt sieciowy Cisco TelePresence Server 7010. Cisco TelePresence Server 7010 23 stron. 600w ac-input power supply and fan tray replacement
Również dla Cisco TelePresence Server 7010: Instrukcja instalacji (15 strony), Instrukcja instalacji (14 strony), Pierwsze kroki (16 strony), Instrukcja wymiany (18 strony)
Drukuj stronę
The command show interfaces serial slot/port displays statistics for the specific serial interface you
specify by its slot/port address. If you use this command without the type and slot/port arguments,
the system will display statistics for all interfaces in the system.
Router> show int hssi 1/0
Hssi 1/0 is up, line protocol is up
Hardware is cxBus HIP
Internet address is 1.1.1.9, subnet mask is 255.255.255.0
(display text omitted)
The command show configuration displays the contents of the system configuration file stored in
NVRAM.
Router# show config
Using 1652 out of 130048 bytes
version 10.3(3)
!
hostname Router
!
enable-password guessagain
!
microcode TRIP flash trip1-0
microcode reload
!
interface hssi1/0
ip address 1.1.1.67
ip route-cache cbus
no keepalive
!
interface serial2/1
ip address 1.1.1.12
(display text omitted)
The command show protocols displays the global (system-wide) and interface-specific status of any
configured Level 3 protocol.
Router> show protocols
Global values:
Internet Protocol routing is enabled
Hssi1/0 is up, line protocol is up
(display text omitted)
Cisco 7010 and Cisco 7505 Chassis Replacement Instructions
Replacing the Chassis
21