Cisco Meraki MX100 Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Cisco Meraki MX100. Cisco Meraki MX100 5 stron.

WAN / Internet port

Reset button

Power input

The MX64 bottom panel

Please note that the serial number is located on the product label at the bottom panel of MX64

Mounting hardware

The supplied wall screws and anchors allow you to mount the appliance on a drywall surface, either vertically or

horizontally. The distance between the holes you drill should be 5-1/8 inches (13 cm).

• For mounting on drywall, use a ¼-in drill bit, then insert the plastic and screw assemblies.

• For mounting on wood or a similar surface, use only the screws.

• Allow the heads of the screws to stick out far enough to be inserted securely into the back of the appliance.

A steady green LED indicates bidirectional connectivity.

The LAN4 port can either be a LAN port or a second

Internet port.

Provides connectivity to the WAN.

Insert a paper clip if a reset is required.

• Press for 1 second to delete a downloaded

configuration and reboot.

• Press and hold for more than 10 seconds to force a

full factory reset.

Designed for use only with the unit's power supply.