Cisco S695F Instrukcja instalacji sprzętu - Strona 45
Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Serwer Cisco S695F. Cisco S695F 50 stron. Web security appliance
Również dla Cisco S695F: Podręcznik dla początkujących (18 strony), Podręcznik (24 strony)
Drukuj stronę
Maintenance and Upgrades
Warning
Warning
Warning
Warning
Warning
Warning
Step 1
Remove the drive that you are replacing:
a) Press the release button on the face of the drive tray.
b) Grasp and open the ejector lever and then pull the drive tray out of the slot.
Statement 1018 Supply Circuit
To reduce risk of electric shock and fire, take care when connecting units to the supply circuit so that
wiring is not overloaded.
Statement 1019 Main Disconnecting Device
The plug-socket combination must be accessible at all times, because it serves as the main disconnecting
device.
Statement 1024 Ground Conductor
This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground conductor
or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate
electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.
Statement 1030 Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1073 No User-Serviceable Parts
There are no serviceable parts inside. To avoid risk of electric shock, do not open.
Statement 1074 Comply with Local and National Electrical Codes
To reduce risk of electric shock or fire, installation of the equipment must comply with local and national
electrical codes.
Cisco Web Security Appliance S195, S395, S695, and S695F Hardware Installation Guide
Remove and Replace a Drive
41