Cisco UCS E Series Instrukcja instalacji - Strona 20
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Cisco UCS E Series. Cisco UCS E Series 46 stron. Ucs e series unified computing system
Również dla Cisco UCS E Series: Przegląd produktów (8 strony), Instrukcja rozwiązywania problemów (28 strony)
Drukuj stronę
Installing the E-Series Servers
To prevent damage to the E-Series Servers, handle the server by the chassis or frame.
Caution
•
•
•
•
•
•
Basic Workflow for Installing the E-Series Server
1.
2.
3.
4.
5.
6.
Tools and Equipment Required for E-Series Server Installation
You will need the following tools and equipment while working with the E-Series Server:
•
•
•
Hardware Installation Guide for Cisco UCS E-Series Servers
20
Gather the required tools and equipment. See the
Server Installation" section on page
Connect the wrist-strap clip to an unpainted portion of the chassis frame to channel unwanted ESD
voltages to ground.
Remove blank faceplates from the slots that you want to use. See the
Prepare the router slot for E-Series Server installation. See the
E-Series Server Installation" section on page
Install the E-Series Server into the router. See the
section on page
25.
Verify the E-Series Server installation. See the
page
27.
Number 1 Phillips screwdriver or a small flat-blade screwdriver
ESD-preventive wrist strap
For routers using DC power-Tape to secure DC circuit breaker handle
"Tools and Equipment Required for E-Series
20.
21.
22.
"Installing the E-Series Server into the Router"
"Verifying E-Series Server Installation" section on
"Removing the Blank
"Preparing the Router Slot for
OL-26447-03