Cisco ASR 9000 Series Podręcznik konfiguracji - Strona 14
Przeglądaj online lub pobierz pdf Podręcznik konfiguracji dla Gateway Cisco ASR 9000 Series. Cisco ASR 9000 Series 46 stron. Line card
Również dla Cisco ASR 9000 Series: Konfigurowanie ustawień sieciowych (26 strony), Podręcznik konfiguracji (50 strony), Podręcznik (24 strony), Konfigurowanie (46 strony), Podręcznik (44 strony), Skrócona instrukcja obsługi (7 strony)
Drukuj stronę
How to Configure Clear Channel T3/E3 Controllers and Channelized T1/E1 Controllers
Restrictions
•
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
controller e3 interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# controller t3
0/1/0/0
Step 3
clock source {internal | line}
Example:
RP/0/RSP0/CPU0:router(config-e3)# clock source
internal
Step 4
cablelength feet
Example:
RP/0/RSP0/CPU0:router(config-e3)# cablelength
250
Cisco ASR 9000 Aggregation Services Router Interface and Hardware Component Configuration Guide
458
Configuring Clear Channel T3/E3 and Channelized T3 and T1/E1 Controllers on the Cisco ASR 9000 Series Router
E3 is not supported on the 4-Port Channelized T3/DS0 SPA.
configure
controller e3 interface-path-id
clock source {internal | line}
cablelength feet
framing {g751 | g832}
national bits {disable | enable}
no shutdown
end
or
commit
show controllers e3 interface-path-id
Purpose
Enters global configuration mode.
Specifies the E3 controller name in the notation
rack/slot/module/port and enters E3 configuration mode.
(Optional) Sets the clocking for individual E3 links.
Note
The default clock source is internal.
When configuring clocking on a serial link, you
Note
must configure one end to be internal, and the other
end to be line. If you configure internal clocking on
both ends of a connection, framing slips occur. If
you configure line clocking on both ends of a
connection, the line does not come up.
(Optional) Specifies the distance of the cable from the
router to the network equipment.
The default cable length is 224 feet.
Note
OL-32684-01