Cisco IC3000 Instrukcja instalacji sprzętu - Strona 19
Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Gateway Cisco IC3000. Cisco IC3000 37 stron. Industrial compute gateway
Również dla Cisco IC3000: Dokumentacja produktu (12 strony)
Installing the Cisco IC3000 Industrial Compute
Gateway
This chapter describes the equipment and the procedures for successfully installing the Cisco IC3000
•
Installing the Cisco IC3000 Industrial Compute Gateway
This chapter describes the equipment and the procedures for successfully installing the Cisco IC3000 and
contains the following sections:
WARNING: Read the installation instructions before connecting the system to the power source. Statement
1004
WARNING: This equipment must be grounded. Never defeat the ground conductor or operate the equipment
in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain that suitable grounding is available. Statement 1024
WARNING: Only trained and qualified personnel should be allowed to install, replace, or service this
equipment. Statement 1030
WARNING: Connect the unit only to DC power source that complies with the safety extra-low voltage
(SELV) requirements in IEC 60950 based safety standards. Statement 1033
WARNING: The covers are an integral part of the safety design of the product. Do not operate the unit
without the covers installed. Statement 1077
Note: When cleaning external surfaces, use a dry, non-static cloth.
Equipment, Tools, and Connections
This section describes the equipment, tools, and connections necessary for installing your device. It contains
the following topics:
Items Shipped with your Cisco IC3000
Unpack the box and verify that all items listed on the invoice were shipped with the Cisco IC3000.
The following items are shipped with your device:
Installing the Cisco IC3000 Industrial Compute Gateway, on page 17
C H A P T E R
Cisco IC3000 Industrial Compute Gateway Hardware Installation Guide
3
17