Philips WT121XES-M Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Monitor Philips WT121XES-M. Philips WT121XES-M 36 stron. Applied rfid

part, without written consent of Philips. Under the law, copying includes translating into another language or format.

The monitor described in this manual, has been certified/registered by the safety agencies/regulatory authorities as

model n° : CMPD1

FCC Notice

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses and can radiate radio frequency energy and , if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, while can be determined by turning the

equipment Off and On, the user is encouraged to try to correct the interference by one or more of the following measures.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio TV technician for help.

Modification

The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly

approved by the manufacturer may void the user's authority to operate the equipment.

Cables

Connections to this device must be made with shielded signals cables with metallic RFI/EMI connector hoods to maintain

compliance with FCC Rules and Regulations.

The lighting flash with arrowhead symbol is intend to alert the user of the presence of uninsulated "dangerous voltage"

within the product's enclosure that may be sufficient magnitude to constitute a risk of electrical shock to people.

The exclamation mark is intended to alert the user of the presence of important operating and maintenance (servicing)

instructions in literature accompanying the appliance.

CAUTION: TO AVOID THE RISK OF ELECTRICAL SHOCK.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

THE ENCLOSURE HAS TO BE CHECKED UPON COLLISION DAMAGE; REFER TO

QUALIFIED SERVICE PERSONNEL

PROSCRIBE MONITOR, ACCESSORy DOCKING STATION AND AC/DC POWER ADAPTER DO

NOT HAVE APPLIED PARTS, AND ARE NOT INTENDED TO BE CONNECTED TO A PATIENT

CIRCUIT.

RISK OF ELECTRICAL SHOCK

RISQUE DE CHOC ELECTRIQUE

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE

WARNING:

CAUTION

DO NOT OPEN

ATTENTION

NE PAS OUVRIR

WT11