Pioneer Super Tuner III D DEH-P8600MP Instrukcja instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Odbiornik samochodowy Pioneer Super Tuner III D DEH-P8600MP. Pioneer Super Tuner III D DEH-P8600MP 9 stron. Multi-cd/dab control high power cd/mp3/wma player with rds tuner
Również dla Pioneer Super Tuner III D DEH-P8600MP: Instrukcja instalacji (4 strony), Instrukcja obsługi (34 strony), Podręcznik użytkownika (24 strony), Instrukcja obsługi (4 strony), Instrukcja instalacji (9 strony)

Drukuj stronę
Pioneer Super Tuner III D DEH-P8600MP Instrukcja instalacji
Connection diagram for standard mode
1. TEL terminal (TEL)
Refer to handsfree telephone
12.
Note:
unit's manual (sold separately).
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
15 cm
1*
3. This product
2. Antenna jack
3*
2*
5. IP-BUS input
(Blue)
5*
4*
13. Connect leads of the same
7. IP-BUS cable
color to each other.
14. Cap (1*)
When not using this terminal,
6. Multi-CD player
do not remove the cap.
(sold separately)
15. Yellow (3*)
16. Yellow (2*)
17. Fuse holder
Back-up
To terminal always supplied
with power regardless of
(or accessory)
ignition switch position.
20. Fuse resistor
18. Red (5*)
19. Red (4*)
Accessory
To electric terminal controlled
by ignition switch (12 V DC)
(or back-up)
ON/OFF.
21. Orange/white
20. Fuse resistor
To lighting switch terminal.
22. Black (ground)
To vehicle (metal) body.
23. ISO connector
24. Yellow/black
Note:
If you use a cellular telephone, connect it via the
In some vehicles, the ISO connector may be
Audio Mute lead on the cellular telephone. If not,
divided into two. In this case, be sure to
keep the Audio Mute lead free of any connections.
connect to both connectors.
26. Connecting cords with RCA pin
23 cm
9. Subwoofer output
plugs (sold separately)
(LOW/SUBWOOFER
4. DSP switch
OUTPUT)
15 cm
Switch the DSP switch
as illustration below.
10. Rear output
(MID/REAR
OUTPUT)
11. Front output
(HIGH/FRONT
OUTPUT)
27. Power amp
15 cm
8. Jack for the Wired Remote Control
Refer to Wired Remote Control's manual
(sold separately).
29. System remote control
28. Blue/white
To system control terminal of the
power amp (max. 300 mA 12 V DC).
30. Blue/white (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
31. Blue/white (6*)
32. The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and 7*
when Pin 5 is an antenna control type. In another
type of vehicle, never connect 6* and 7*.
33. Left
+
35. Front speaker
≠
+
36. Rear speaker
≠
25. Speaker leads
White
: Front left +
White/black : Front left ≠
+
Gray
: Front right +
37. Subwoofer
Gray/black : Front right ≠
≠
: Rear left +
Green
Green/black : Rear left ≠
: Rear right +
Violet
38. Perform these connections when using
Violet/black : Rear right ≠
the optional amplifier.
Connection diagram for 3-way network mode
12.
Note:
27. Power amp
Depending on the kind of vehicle, the function
(sold separately)
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
1*
27. Power amp
(sold separately)
3*
2*
(sold separately)
5*
4*
14. Cap (1*)
When not using this terminal,
do not remove the cap.
15. Yellow (3*)
16. Yellow (2*)
Back-up
To terminal always supplied
with power regardless of
(or accessory)
ignition switch position.
18. Red (5*)
19. Red (4*)
Accessory
To electric terminal controlled
by ignition switch (12 V DC)
(or back-up)
ON/OFF.
21. Orange/white
To lighting switch terminal.
34. Right
+
35. Front speaker
22. Black (ground)
≠
+
36. Rear speaker
≠
23. ISO connector
Note:
+
In some vehicles, the ISO connector may be
37. Subwoofer
divided into two. In this case, be sure to
≠
connect to both connectors.
Fig. 11
Abb. 11
Afb. 11
1. TEL terminal (TEL)
23 cm
39. Low range output
Refer to handsfree telephone
4. DSP switch
unit's manual (sold separately).
15 cm
Switch the DSP switch
as illustration below.
15 cm
3. This product
2. Antenna jack
5. IP-BUS input
(Blue)
8. Jack for the Wired Remote Control
13. Connect leads of the same
Refer to Wired Remote Control's manual
7. IP-BUS cable
color to each other.
(sold separately).
6. Multi-CD player
(sold separately)
28. Blue/white
To system control terminal of the
power amp (max. 300 mA 12 V DC).
17. Fuse holder
30. Blue/white (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
31. Blue/white (6*)
20. Fuse resistor
32. The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and 7*
when Pin 5 is an antenna control type. In another
type of vehicle, never connect 6* and 7*.
20. Fuse resistor
To vehicle (metal) body.
42. Speaker leads
24. Yellow/black
White
: High range left +
If you use a cellular telephone, connect it via the
White/black : High range left ≠
Audio Mute lead on the cellular telephone. If not,
Gray
: High range right +
keep the Audio Mute lead free of any connections.
Gray/black : High range right ≠
: Middle range left +
Green
Green/black : Middle range left ≠
: Middle range right +
Violet
Violet/black : Middle range right ≠
26. Connecting cords with RCA pin
plugs (sold separately)
(LOW/SUBWOOFER
OUTPUT)
27. Power amp
(sold separately)
40. Middle range output
(MID/REAR
OUTPUT)
27. Power amp
(sold separately)
41. High range output
(HIGH/FRONT
OUTPUT)
27. Power amp
(sold separately)
15 cm
29. System remote control
33. Left
34. Right
+
+
43. High range
43. High range
≠
≠
speaker
speaker
+
+
44. Middle range
44. Middle range
≠
≠
speaker
speaker
+
+
45. Low range
45. Low range
≠
≠
speaker
speaker
38. Perform these connections when using
the optional amplifier.
46. External amp is required for connecting the low
Fig. 12
range speaker.
Abb. 12
Afb. 12