Pioneer SUPER TUNER III DEH-503 Instrukcja obsługi - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz CD Pioneer SUPER TUNER III DEH-503. Pioneer SUPER TUNER III DEH-503 21 stron. High power cd player with fm/am tuner

Pioneer SUPER TUNER III DEH-503 Instrukcja obsługi
Additional Functions
Parts Identification
[8] Clock
® Synchronization with a time
announcement
[41] lumination
Switching Itumination Color
» DEH-303, DEH-203 do not have this
function.
The illumination color can be set to amber
or green.
Press button [11] for at least 2 seconds.
Repeat this operation to switch between
amber and green.
Using the Clock Display
Displaying the Time
Press button 18} again for more than 2
seconds to release.
+ The clock can be displayed only when the
power is ON,
» When another operation is executed, the
clock will turn off for about 25 seconds
and then turn on again.
Adjusting the Hour
[10} to advance the hour by one hour.
» When the button is held down, the hour
will change quickly.
Adjusting the Minute
While pressing button [8], press button @
{10} to advance the minute by one minute.
» When the button is heid down, the
minute will change quickly.
+ After the minute is adjusted, the clock will
start from 0 second when button [8] is
released.
Set the time time using "Synchronization
with a time announcement."
Pressing button @ of {10} white holding
down button [8] causes the time to display
as ":00."
* When the minute display is in the range
00-29, the minute figure is restarted from
zero. (Example: When the time is "10:18,"
it restarts from "10:00".)
+ When the minute display is in the range
30-53, the hour figure is rounded up to
restart the minutes, (Exampie: When the
time is "10:36", it restarts fromm "11:00".)
Using the Remote Control
* DEH-303, DEH-203 do not have this
function.
Loading Batteries
UM-4, AAA, IEC R03 1.5 V
Precautions
- Do not place the remote control unit in
high temperatures or in direct suntight.
' install the batteries in the proper
direction.
+ Use only UM-4, AAA, or IEC RO3 1.5 V
batteries.
* Do nat mix old and new batteries.
+ The batteries provided with the unit are
not rechargeable. Therefore doa not
recharge them.
« ifthe remote control unit is not to be used
for more than a month, remove the
batteries.
» if there is battery leakage, wipe the
leakage completely and install new
batteries.