Pioneer TVM-PW910T Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Monitor Pioneer TVM-PW910T. Pioneer TVM-PW910T 36 stron. 9-inch wide vga private monitor

Drukuj stronę

Notes on using the device

Things to observe

Do not use for long after the engine is off

・ Using the device long after the engine has been

turned OFF will consume battery power, which

may cause unexpected trouble.

Pay attention to radio-wave interference

・ Using mobile phone or other electronic devices

close to the set may affect the image or cause noise

due to radio-wave interference.

How to clean

・ Wipe gently using soft cloth.

・ If the device is very dirty, wipe it with a wet cloth

soaked with neutral cleaning agent, then wipe with

dry cloth.

・ Do not use insecticide or other volatile agents, and

do not let the device to come in contact with rubber

or vinyl products for extended period to avoid

leaving trace or causing discoloration.

LED screen

Attention during handling

・ Due to high temperature, the LED screen can be

damaged if used under direct sunlight for extended

period. Thus, if possible, avoid using under direct

sunlight.

・ Use the device within the temperature range

recommended.

・ Do not press the LED screen too hard to avoid

breaking or damaging it.

・ Do not touch the LED screen unnecessarily to

avoid crack or dirt.

・ Small dark dots or bright (shining) dots may be

seen on the screen. These do not mean damage, but

are characteristics of LED screen.

Notes on using the device

・ Using the device on non-DC12V vehicles (like

vessel) may cause damage.

・ The company will not be responsible for any defect

resulting from not observing the precautions stated

in this manual.

LED back light

・ When using the device under low-temperature

surroundings, the remaining image will become

conspicuous and the visual quality will deteriorate

slightly This is characteristic of LED. Raising the

surrounding temperature will bring these back to

normal.

・ If the monitor temperature rises due to mid-

summer hot weather or direct HVAC air blow, the

backlight brightness may dim down by itself to

protect the LED.

・ The life-span of the LED back light is assumed to

be more than 10,000 hours, but if used in high-

temperature environment, the life-span might be

shortened.

・ When the LED back light life expires, the screen

will turn dark, and the image may not appear.

Under such situation, consult the dealer.