3Com 3CRWE90096A - Wireless Access Point Skrócona instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy 3Com 3CRWE90096A - Wireless Access Point. 3Com 3CRWE90096A - Wireless Access Point 20 stron. Wireless building-to-building bridge
Drukuj stronę
3 Insert one end of the RJ-45 crossover cable into the bridge 10BASE-T
Ethernet port
port on your Ethernet LAN device (a hub, for example).
Starting the Bridge Manager
To run the Wireless Bridge Manager, follow these steps:
1 On the Windows taskbar, click Start.
2 Select Programs and then select the Program Group you created when you
installed the Wireless Bridge Manager.
3 Select the 3Com Wireless Bridge Manager entry.
The 3Com Wireless Building-to-Building Bridge Manager screen appears
and the Bridge Manager automatically scans the network for new devices.
Scanning for Bridge Groups
Whenever it is started, the Bridge Manager automatically scans the local
network to detect currently accessible bridge groups. In this case, a bridge
group is defined as all wireless bridge units having the same wireless local area
network (WLAN) service area (also known as Extended Service Set Identification
(ESSID)). The detected bridge groups are displayed on the 3Com Wireless
Building-to-Building Bridge Manager screen.
Selecting a Bridge to Configure
With the 3Com Wireless Building-to-Building Bridge Manager screen displayed,
follow these steps:
1 Right-click a displayed wireless bridge unit name to show the configuration
options available for it.
2 Select Configure.
The Wireless Bridge Configuration screen appears (see the next figure),
displaying tabs for Network / Security, Options, Tools, and Info. The
functions of these tabs are described in detail in the user guide.
. Insert the other end of the cable into the appropriate
3
Configuring the Wireless Bridge Units
5