ALDEN Satlight Track 60 Instrukcja instalacji i obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Antena ALDEN Satlight Track 60. ALDEN Satlight Track 60 15 stron. Portable satellite antenna

Drukuj stronę

1. Technical Features

Setting Menu

To reach the SETUP menu, fold the antenna and then press the

and confirm by pressing the

1. TRANSP. MOD : Search data settings.

This menu enables to select and set the data used for the search of the satellite.

Caution: if not used correctly you may cause the module to dysfunction. Do not use without Alden's or your dealer's

advice.

2. EXT. BOOT : when used, this function enables you to launch an automatic search on the chosen satellite when using

the module connected to the OUT TO DEMO output on your S.S.C.

Caution: prior to this, the S.S.C. has to be in stand by modus (green LED on) for the function to be accepted.

3. ANT STATUS : When set on «NO», when switching the system off, the satellite system will remain open, orientated

towards the satellite. On the opposite, when set on «YES», the satellite system will close itself automatically when you

switch the installation off.

4. POWER OPTION : When this menu is set on «YES», it enables to put the S.S.C. in stand by mode when the externale

receiver connected to the OUT TO DEMO input is not used. When this menu is set on «NO», the S.S.C. switch itself off

(power consumption = 0amps) when the externale receiver connected to the OUT TO DEMO input is not used.

5. LANGUAGE : Select your language to visualize the different menus.

6. VERSION : Provides information on the software version and product.

7. MEC. ANTENNA : Indicates the kind of satellite system which is connected to the S.S.C.

This menu also enables you to change the kind of automatic satellite system (only Alden brand). Using ws

choose the corresponding satellite system. Press

8. DiseqC MENU : When this function is active, a number will be assigned to a satellite (DiseqC standard) and this

information will also be available in the receiver/television connected to the OUT TO DEMO on the S.S.C..This function

enables you to search automatically for a satellite when changing satellites on you receiver/television.

Example: if the receiver is programmed as the following :

OPTUS D3

-> DiseqC 1.1 : 1

OPTUS C1

-> DiseqC 1.1 : 2

Match a number to a satellite by using ws

Press

to confirm each of the 8 satellites.

Caution: only one number per satellite, one satellite can not have several numbers.

NB: if your receiver is only compatible DiseqC 1.0, refer to the following details:

Caution: the receiver or television must be compatible with a DiseqC 1.0 or 1.1 to enable you to use this function on the

S.S.C..

9. ES/Nb N° Menu : Indicates the level of reception of the satellite system. The higher the level, the better the quality of

the reception.

Caution: The value is given as an indication.

10. Upgrade : This menu allows you to update the SSC HD using a USB key.

11. Advanced Setting-> display orientation: Activating this function will rotate the display of the screen giving you the

possibility to fix the module upside-down in the storage cabinet

12. Exit: close the menu

key.

Sat. OPTUS D3

Letter

button. Select one of the sub-menus using the ws keys

to confirm your choice.

Sat. OPTUS C1

Corresponding number