Xerox DocuPrint C3055 DX Podręcznik ustawień - Strona 14
Przeglądaj online lub pobierz pdf Podręcznik ustawień dla Akcesoria do drukarek Xerox DocuPrint C3055 DX. Xerox DocuPrint C3055 DX 33 stron. Internal hard disk
Również dla Xerox DocuPrint C3055 DX: Instrukcja instalacji (8 strony), Instrukcja instalacji (16 strony), Podręcznik ustawień (20 strony), Instrukcja instalacji (16 strony)
Drukuj stronę
2.2
Setting the ESC/P Mode Menu
This section explains the items in the ESC/P mode menu and how to configure them.
ESC/P Mode Menu Items
The items that can be set in the ESC/P mode menu are as follows:
Features Menu
Paper Tray
Sets the paper tray to be used when printing.
The following options are available:
[Tray 1] (default)
[Tray 2]
[Tray 3]
[Tray 4]
[Bypass Tray]
[Auto]
When [Auto] is selected, the printer searches for the paper tray that contains the paper that
matches the [Output Size] setting and automatically feeds paper from that paper tray.
Note
• [Tray 1] - [Tray 4] display the size of the paper loaded in each tray next to the tray names.
• When [Auto] is selected, and if the paper of the same size is loaded in more than one paper tray, the
printer selects a paper tray based on the tray priority setting of a common menu.
• [Tray 2] - [Tray 4] are displayed only if the 500 sheet feeders (optional) are installed.
Output Size
Sets the size of the paper to be used when printing. This can be set only when [Paper Tray]
is set to [Auto] or [Bypass Tray]. Only the sizes for cut sheets can be selected.
The following options are available:
[A4] (default)
[A3]
[A5]
[B4]
[B5]
[11 x 17]
[8.5 x 13] (Available only when [Paper Tray] is set to [Bypass Tray])
[8.5 x 14]
[8.5 x 11]
[100 x 148mm] (Available only when [Paper Tray] is set to [Bypass Tray])
Note
• When [Zoom Mode] is set to [Fixed %] or [Whole Output Size], the printer automatically determines the
zoom ratio based on the [Document Size] and [Output Size] settings.
When [2 Pages Up] is enabled, the zoom ratio will be 1/2 of the zoom ratio determined from [Document
Size] and [Output Size].
• [Output Size] cannot be set when [Paper Tray] is set to [Tray 1], [Tray 2], [Tray 3], or [Tray 4]. The size of
the paper loaded in the paper tray will be displayed.
14
2 Setting the ESC/P Mode