Yamaha YSP-1600 Skrócona instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla System głośników Yamaha YSP-1600. Yamaha YSP-1600 27 stron. Digital sound projector
Również dla Yamaha YSP-1600: Skrócona instrukcja obsługi (15 strony), Skrócona instrukcja obsługi (13 strony)
Drukuj stronę
1 2 3 4
ENTER
RETURN
Turning on the unit
1
Press the z key.
When the unit is turned on for the first time after purchase,
the
indicator on the front panel will flash slowly. The
screen below will be displayed on the TV when the TV is
turned on.
S h a r e
Y o u
c a n
s h a r e
( W i - F i )
s e t t i n g s
n e t w o r k
w i t h
u s i n g
a
d e v i c e
l a t e r .
Flashes slowly
[ E N T E R ] : S t a r t
[ R E T U R N ] : C a n c e l
[
• When the screen is not displayed, use the input button on the TV's remote control
to switch input so that video input from this unit is displayed. When this unit is
connected to the TV as shown on page 10, select "HDMI 1".
• The language used for menu display (OSD Language) can be selected from the
screen shown above. Use the
/
key to select the language, and follow the
on-screen instructions. The OSD language can also be changed from the setup
menu at any time. Press and hold the SETUP key until the "OSD Language" menu
is displayed on the TV, and use the
/
key to select the language. Press the
SETUP key to exit the setup menu.
While this screen is displayed, an iOS device (such as an iPhone)
can be used to easily connect the unit to a wireless network. Follow
the procedure "Connecting the unit to a wireless network" on this
page.
If you will not use an iOS device to connect to a wireless network,
press the RETURN key and proceed to "c Surround sound effect
for the installation position".
• This screen will not be displayed and the
connected to a router via its NETWORK jack (wired connection).
• See page 31 in the Owner's Manual for wireless network connection methods
other than "Share Wi-Fi Settings", or for more information regarding wired and
wireless networks.
Connecting the unit to a wireless network
1
W i - F i
S e t t i n g s
t h e
w i r e l e s s
o f
t h e
S o u n d
P r o j e c t o r
w i t h
i O S 7
o r
] : O S D
L a n g u a g e
2
3
indicator will not flash if the unit is
Press the ENTER key.
The screen below is displayed.
S h a r e
W i - F i
S e t t i n g s
M a k e
s u r e
y o u r
i O S
d e v i c e
c o n n e c t e d
t o
y o u r
W i - F i
n e t w o r k ,
a n d
t h e n
o p e n
W i - F i
s e t t i n g s
s c r e e n
y o u r
i O S
d e v i c e .
[ E N T E R ] : C o n f i r m
[ R E T U R N ] : C a n c e l
• You need iOS device with iOS 7.1 or later.
• Before proceeding, confirm that your iOS device is connected to a wireless
router (access point).
Press the ENTER key.
Display the Wi-Fi setup screen on the iOS device
and select the unit from "SETUP A NEW AIRPLAY
SPEAKER...".
iOS (an example of English version)
The name of the unit
i s
t h e
o f
b Connections
11
En