Zanussi ZDT40 Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zmywarka Zanussi ZDT40. Zanussi ZDT40 28 stron. Zanussi washer dryer brochure
Również dla Zanussi ZDT40: Specyfikacje (7 strony)

Drukuj stronę

Water hardness

Clarke

18 - 22

13 - 17

5 - 12

< 5

The water softener must be set in both ways:

manually, using the water hardness dial and

electronically.

Setting the water softener manually (see table)

Setting the water softener

electronically (see table)

1. Press the On/Off button. The appliance

must be in setting mode.

2. Press and hold Programme selection/

Cancel button until programme light A

flashes and programme light B illuminates

with fixed light.

3. After a few seconds:

– programme light B turns off

– programme light A goes on flashing

°TH

mmol/l

26 - 32

2,6 - 3,2

19 - 25

1,9 - 2,5

7 - 18

0,7 - 1,8

< 7

< 0,7

Set switch to position 1 or

Adjusting the water hardness

setting

manually

electronically

The water softener is factory set at position 2.

– End of programme light starts flashing:

the number of flashes corresponds to

current level set. The flashing is repea-

ted with a pause of a few seconds.

Examples: 5 flashes, pause, 5 flashes,

pause, etc... = level 5.

4. To change the level, press the Programme

selection/Cancel button. Each time the

button is pressed the level increases (level

1 follows level 10). The End of pro-

gramme light indicates the new setting.

5. To memorise the operation, switch off the

dishwasher.

Use of salt

level 4

yes

level 3

yes

level 2

yes

level 1