Lenovo 9360-4PX Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Lenovo 9360-4PX. Lenovo 9360-4PX 42 stron.

•

Ensure that there is no stabilizer bracket installed on the rack cabinet.

•

Do not use a ramp inclined at more than ten degrees.

•

Once the rack cabinet is in the new location, do the following:

Lower the four leveling pads.

Install stabilizer brackets on the rack cabinet.

If you removed any devices from the rack cabinet, repopulate the rack cabinet from the

lowest position to the highest position.

If a long distance relocation is required, restore the rack cabinet to the configuration of the rack

cabinet as you received it. Pack the rack cabinet in the original packaging material, or equivalent.

Also, lower the leveling pads to raise the casters off of the pallet and strap the rack cabinet to the

pallet.

Statement 12:

CAUTION:

See the instructions in the rack documentation before you install devices, remove devices, or

relocate the rack.

Statement 13:

CAUTION:

The weight of this part or unit is more than 55 kg (121.2 lb). It takes specially trained persons, a

lifting device, or both to safely lift this part or unit.

>55 kg (121.2 lb)

55 kg ( 121.2 lb)