Lenovo ThinkSystem SM27A17643 Podręcznik użytkownika - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przełącznik Lenovo ThinkSystem SM27A17643. Lenovo ThinkSystem SM27A17643 45 stron. Analog 1x8 kvm switch
Drukuj stronę
Chapter 3
Before Installation
Basic Installation
Quick Start
This section provides instructions on setting up a basic SM27A17643 KVM
system and accessing connected servers.
For instructions on rack-mounting each product, see
Procedure
(on page 5).
Major steps for setting up a basic system include:
1. Connect servers to the SM27A17643 switch. See
(on page 8).
2. Log in to the SM27A17643 switch to access servers, and then log out.
Initial OSD Operation
See
In This Chapter
Before Installation .......................................................................................8
Basic Installation .........................................................................................8
Initial OSD Operation .................................................................................10
It is very important to locate this product in a suitable environment.
The surface for placing and fixing this product should be stable and
level or mounted into a suitable cabinet.
Make sure the place has good ventilation, is out of direct sunlight,
away from sources of excessive dust, dirt, heat, water, moisture, and
vibration.
Convenience for connecting this product to related facilities should
be well considered too.
After rack-mounting the SM27A17643 switch, you can connect servers
and peripheral devices to the switch.
To connect servers to SM27A17643, perform these steps:
Step A: Connect the Keyboard/Mouse/Monitor
Step B: Connect Servers
Step A: Connect the Keyboard/Mouse/Monitor
1. Turn OFF all devices, including the SM27A17643 switch and servers.
(on page 10).
(on page 9)
8
Rackmount
Basic Installation
(on page 8)