AFX LASW051728LAJD2 Series Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Oświetlenie zewnętrzne AFX LASW051728LAJD2 Series. AFX LASW051728LAJD2 Series 2 stron. Led outdoor sconce luminaires surface mount

Drukuj stronę

LED Outdoor Sconce Luminaires

Surface Mount

120-277VAC / 60Hz

4. Fixture back pan mounting.

For

LASW051728LAJD2xx,

(6).

For LASW052833LAJD2xx, install fixture back pan (5) to mounting bracket (2) by aligning to two studs (3) then secure with two thumb nuts

(6). For additional support use two wood screws (10) on previously drilled holes or plastic anchors (11).

5. Diffuser installation.

For

LASW051728LAJD2xx,

For LASW052833LAJD2xx, install diffuser (7) to the back pan (5) by aligning side holes then secure with four #8-32 screws (8).

6. For Wet Location Use:

Apply a small amount of silicone (not included) per manufacturer's instruction around screws (8) and around the diffuser (7) where it contacts

with the surface of the wall on top and two sides, but not on bottom.

7. Restore power at fuse or circuit breaker box.

Limited Factory Warranty

AFX Inc. hereby warranty that this fixture is free from defects in materials and workmanship when installed and used under normal operating conditions

for a period of 5 years from date of shipment from factory. This warranty covers all component parts and extends only to replacement of defective fixture

or components; it does not cover failure due to improper installation, misuse, mishandling, or damage incurred in transit.

Page 2 of 2

install fixture back pan (5) to mounting bracket (2) by aligning to two studs (3) then secure with two thumb nuts

install diffuser (7) to the back pan (5) by aligning top and bottom holes then secure with two #8-32 screws (8).

Models # LASW051728LAJD2xx

LASW052833LAJD2xx

8061064 R2