ABBA TSRPT150 Instrukcja instalacji - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Transformator ABBA TSRPT150. ABBA TSRPT150 8 stron.

To prepare the landscape wire for connection, follow these

simple steps:

Strip 1/2 inch of insulation from both wires.

Twist the exposed ends of the wires together tightly.

To connect the wires to the transformer, please carefully follow

these step-by-step instructions:

Carefully position the wires underneath each terminal plate and proceed to

secure them firmly by tightening the screws.

After connecting the wires to the terminal blocks, it is vital to verify

that they are securely and properly positioned. Follow these steps to

ensure a secure connection and complete the installation:

1.Carefully inspect the terminal blocks to confirm that the wires are fully inserted

and tightly secured within their respective terminals. Make sure there are no loose

or exposed wires.

2.Gently tug on each wire to ensure it is firmly held in place and does not come

loose. This step helps verify the stability of the connections.

By following these instructions, you will guarantee that the wires are securely

placed within the terminal blocks, minimizing the risk of disconnections or

electrical issues. Additionally, closing the casing properly provides protection to

the internal components of the transformer.