Aroma 7-Cup/1.7-Liter Electric Water Kettle Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Czajnik Aroma 7-Cup/1.7-Liter Electric Water Kettle. Aroma 7-Cup/1.7-Liter Electric Water Kettle 11 stron. 7-cup/1.7-liter electric water kettle
Drukuj stronę
USING YOUR WATER KETTLE
BEFORE FIRST USE:
Before using for the first time, it is recommended to clean the interior of the
kettle thoroughly. Please follow the procedure below before using the kettle:
1. Remove all packing materials and make sure that product is received in
good condition.
2. Taking care to keep the electrical components on the exterior of the kettle
dry, wipe out the interior of the kettle with a damp, soapy cloth. If your hand
will not fit inside the kettle, swish warm, soapy water around in the interior of
the kettle with the lid closed.
3. Rinse out the inside of the kettle thoroughly with water.
4. Remove the decalcification filter (see "Removing & Inserting the Filter" on
page 5 for instructions). Wash filter in warm, soapy water. Rinse and dry
thoroughly before placing back in the unit.
5. With a damp cloth, gently wipe off the exterior of the kettle. Do not wipe off
electrical components. This may cause damage to the unit.
6. Dry all parts completely.
7. It is also recommended to run your kettle through one boiling cycle before
using it to consume beverages. Following the instructions in "Boiling Water"
below, boil one kettle of water. When water has boiled, pour it out and rinse
the inside of the kettle once more. Your kettle is now ready for use.
BOILING WATER:
1. Place power base on a sturdy, level and heat-resistant surface.
2. Make sure that the removable filter is properly inserted. See "Removing and
Inserting the Filter" on page 5 for instructions on inserting the filter.
3. Open the kettle lid and fill with water through lid opening. Do not fill past the
"MAX" line on the water level indicator. Use distilled water when possible for
best taste and to minimize mineral build-up in the kettle.
NOTE:
• Never fill kettle with any liquid other than water.
4. Close the lid until it locks securely into place.
5. Making sure the kettle and power base are completely dry and sitting on a
level, sturdy surface, place the kettle onto the power base and plug the
power cord into a wall outlet.
6. Push up on the power switch located below the handle to begin the boiling
process. The indicator light will illuminate.
NOTE:
• Never open the lid while water is boiling.
• Stainless steel body will become extremely hot.
CONTINUED ON NEXT PAGE
4