Acoustic B200 Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz Acoustic B200. Acoustic B200 16 stron. Bass guitar amps
Również dla Acoustic B200: Instrukcja obsługi (8 strony)

Drukuj stronę

B200, B200H, B410, B115, B600H, B810

B200

1. Speaker Out: Two-conductor, 1/4" Speaker Output Jacks, 4 Ohms minimum

load, parallel.

2. Effects Loop Send & Return: Unbalanced, 1/4" Line Output Jack. These jacks

will allow a signal to be sent to an external effects device or equalizer, then

patched back in before the power amp section.

3. Horn Switch: Press in to toggle horn on or off.

4. Direct Out with Volume Control: This sends a line-level signal to a PA system or

recording device. Use the Direct Out Volume knob to prevent clipping.

5. Ground Lift Switch: Lifts ground on pin 1 on XLR.

B600H

1. Speaker Out: Two-conductor, 1/4" Speaker Output Jacks, 2 Ohms minimum

load, parallel.

2. Effects Loop Send & Return: Unbalanced, 1/4" Line Output Jack. These jacks

will allow a signal to be sent to an external effects device or equalizer, then

patched back in before the power amp section.

3. Direct Out with Volume Control: This sends a line-level signal to a PA system or

recording device. Use the Direct Out Volume knob to prevent clipping.

4. Ground Lift Switch: Lifts ground on pin 1 on XLR.

200 WATT COMBO, 200 WATT HEAD, 410 CABINET,

115 CABINET, 600 WATT HEAD, 810 CABINET

USER'S MANUAL