ARPACK AirClean AC 40 Podręcznik - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik dla Oczyszczacz powietrza ARPACK AirClean AC 40. ARPACK AirClean AC 40 18 stron.

Drukuj stronę
7.2 Operation
It is necessary to select the device's installation location. The location may include a floor, shelf, table or
other adequate structure. The device should not constitute a hindrance and should be protected against
overturning.
7.2.1 Stand
Mount the stand on the device using the adequate screws (Fig. 3). Prior to first start-up, make sure that the
device is heated up to the room temperature and that no condensation occurs. Pay attention to the
following aspects when starting up the device:
•
The device is supplied with the mains voltage of 220V/50Hz.
•
The device's working position is the vertical position.
•
The device's ventilation openings are always open (Fig. 3).
•
The device is started up by pressing the switch.
•
The device is heated up and enters the operating mode after approx. 20 minutes from start-up.
7.3 Equipment and operating specification
The device's housing is made from steel sheets and is powder coated.
The device's lower part features a lever switch and a replaceable fuse. The housing's interior features a flat
photocatalytic element based on porous quartz glass and a LED-UV-A emitter with a power feeder.
The device's operation is silent and the device does not require regular replacement of the photocatalytic
elements, because they are not contaminated with dust particles during operation.
EN
11 | ARPACK GmbH