array K KW8 Podręcznik użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Głośniki array K KW8. array K KW8 17 stron.

KW8

For installations where long distance DMX cable connections are needed, we suggest using a DMX

terminator. Please note:

•

The DMX terminator is a male XLR 3 pins connector with a 120 ohm resistor between pin 2 and

•

The DMX terminator must be plugged into the last unit (DMX OUT panel connector) of the DMX.

line.

7.5 vIDEo CoNNECTIoN

The K-OWL features a HD-SDI camera supporting multiple output formats. As default, the camera

outputs a digital HD-SDI signal at 1080 Progressive (25 fps). If an analog signal or a different

resolution of the camera is desired, please contact the official K-array distributor in your country.

To connect the camera to your computer running the OWL-Manager software, you need a SDI to USB

grabber, as shown in the scheme below. We recommend using the K-USB/SDI accessory.

USB cable

Camera connected via BNC cable + K-USB/SDI adapter

2 (+)

120 Ω

3 (-)

DMX terminator

SDI to USB grabber

BNC cable

1 (gnd)

Ver. 1.2