Aerial HF2 Series Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy filtracji wody Aerial HF2 Series. Aerial HF2 Series 17 stron. Hepa filter

MAINTENANCE AND SERVICE

Maintenance and service

Damage to the device

Cleaning agents can cause damage to surfaces.

CAUTION

Use only mild detergents.



The cleaning intervals depend largely on the operating conditions. Therefore

check your HEPA filter HF2 after each drying operation.

In order to guarantee trouble-free functioning of the device it must be regularly

cleaned, and in particular the prefilter and the HEPA filter must be checked at

regular intervals. To change the filter proceed as follows:

Fig. 3: HEPA filter and prefilter

Open the two tension locks on the front and rear sides. Remove the cover



from the housing bottom part.

Pull the HEPA filter out of the housing bottom part, and insert new HEPA



filter or prefilter (see fig. 4 and 5 on the next page). Use only original filters

to guarantee proper functioning of the HEPA filter HF2. The prefilter is

fastened around the HEPA filter with Velcro (see fig. 3).

Clean casing on the outside with a moist cloth.



Page 8 of 11

HEPA

filter

Prefilter