Aerial HF2 Series Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy filtracji wody Aerial HF2 Series. Aerial HF2 Series 17 stron. Hepa filter
TRANSPORT AND INSTALLATION
4
Transport and installation
Transport
1.
Remove the packaging material completely and dispose of according to the
local regulations.
2.
Check the delivery for completeness.
3.
Use the front handle or the two handle recesses in the bottom to transport
the HEPA filter HF2 to the place of installation.
Scope of delivery
HEPA filter HF2 (4x tube connector, 2x screw cap, 6x gasket)
One instruction manual
Operating conditions
The HEPA filter HF2 is designed for use with a side channel compressor or the
noise box VP2/VP3 as additional equipment for filtering mould spores and other
suspended solids in drying of the screed insulation layer using a vacuum
technique. It works without problems in the temperature range from -10 °C to
+40 °C.
Fig. 2: Fixing points for belt system
Page 6 of 11
Installation
The devices can be stacked, and are
provided with fixing points for a belt
system on the right and left.