3D Systems Sense Podręcznik użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Skaner 3D Systems Sense. 3D Systems Sense 18 stron. 3d

SENSE SCANNER TIPS AND TRICKS

Use the following tips to get the most from your scanning experience:

Lighting

Different lighting conditions can affect the quality of a scan. The Sense 3D scanner is designed for indoor use, and

will work less than optimally in direct sunlight.

Position your subject in a way that will cause as little shadow as possible. You may need to add additional light to

reduce shadows.

You'll get the best results if the light shines with equal intensity over the subject being scanned. Areas that are less

illuminated might show up too dark in the scan, and areas that are over-illuminated might show inaccurate colors.

If you scan in darkness, the scanner will capture geometry but not color.

Positioning

In preview mode, make sure that the whole object you want to scan shows yellow on the screen. This helps ensure

that you capture the entire object while scanning.

Keep the scanner within its optimal distance range of 15 to 60 inches (38.1 to 152.4 cm).

Motion

Multiple passes on the object are allowed. If there are gaps in the scanned data after a single pass, continue scan-

ning to try to fill the gaps.

Holding the scanner still over a portion of the object can also fill data gaps.

If the 3D view turns white as you're scanning, it's because you're holding the scanner too close to the object being

scanned. To correct the view, move the scanner out to at least the minimal defined distance of 15 inches (38.1cm).

General

When scanning a human body, begin by aiming at the torso, and then get a whole body contour scan. Finish by

scanning the head.

Before scanning a small object or one without a lot of distinct features (such as a standard coffee mug), add some

items around the object. This will help the scanner avoid losing tracking by giving it more to lock on to.

3D Systems, Inc.