Altronics Micron T 2445 Instrukcja obsługi

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Altronics Micron T 2445. Altronics Micron T 2445 3 stron.

Drukuj stronę
30W Micron Soldering Iron
INTRODUCTION
Thank you for purchasing the T 2445 30W Soldering Iron – a great beginning solution for your solder-
ing equipment needs! We believe that you will be more than satisfied with the many features and the
versatility of your new soldering device. Applications include: Radio controls, hobbies and crafts, small
electrical parts, PCBs, wires.
Before using the soldering iron inside, please carefully read the instruction manual and observe all
warnings and instructions for safe operation. Failure to follow all instructions here listed may result in
electric shock, fire, or serious injury. Retain the instructions for future reference.
PRODUCT DESCRIPTION
The unit has a slender soldering iron pencil design with a comfortable rubber grip that prevents oper-
ator fatigue. The soldering iron is and is connected to the mains power via a burn-resistant approved
power cord.
SPECIFICATIONS
Input:
240Va.c. 50Hz Class I
Output:
30W
Temperature
400°C to 450°C
Range:
Heater:
Mica Insulated (Natural)
[Minimal smoking 1st
usage]
Length:
230mm
Weight:
150g
WARNING:
1.
Operate this iron in a well ventilated area.
2.
Do not tap the tip heavily in attempting to remove solder build-up.
3.
Do not use it for non-soldering applications.
4.
Do not disassemble the iron.
5.
Only use recommended replacement parts e.g. tips.
6.
Please turn off the power when you have finished using it.
7.
This tool must be placed on its stand when not in use.
8.
Do not immerse in water.
9.
Before cleaning the unit, always remove the power lead plug from the socket. Unscrewing the
housing is not permitted.
10. This appliance is not intended for use by persons (including children) with reduced physical,
sensoryor mental capabilities, or lack of experience and knowledge, unless they have been
givensupervision or instruction concerning use of the appliance by a person responsible for their
safety.
11. Children should be supervised to ensure that they do not play with the appliance. Failure to
observe this safety regulation could result in a risk to life and limb. The manufacturer or supplier
shall not be liable for damage resulting from misuse of the unit or unauthorised alterations.
Operating Instructions
PRODUCT
BOX CONTENTS:
-Soldering iron and stand / holder
Accessories (not Included):
-Spare tips available T 2446-48
T 2445