Artila Matrix 604 Instrukcja szybkiej instalacji

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Pulpit Artila Matrix 604. Artila Matrix 604 4 stron.

Drukuj stronę
Overview
Matrix 604 is a WinCE ready, ARM9-based embedded
computer. Its lower power and robust design concept makes it
an ideal industrial computer platform for harsh environment.
The WinCE 6.0 OS is pre-installed in the on-board Flash
memory and the SDK for Microsoft Visual Studio 2005 coming
with Matrix 604 CD is ready for your application development.
Features
1.
ARM926EJ-S ARM Thumb Processor 400MHz w/MMU
2.
32-KByte Data Cache and 32-KByte Instruction Cache
3.
64MB SDRAM, 128MB NAND Flash on board
4.
One 10/100 Mbps Ethernet
5.
Two USB 2.0 full speed (12 Mbps) Host Ports
6.
One software configurable RS-232/422/485 port and three
RS-232/485 ports
7.
One serial console port
8.
5 programmable GPIO
9.
9 to 48VDC power input
10.
Pre-installed WinCE 6.0 and file system
11.
SDK available in Artila CD
12.
Supporting WinCE Remote Display Control
13.
Optional DIN RAIL mounting adaptor
Packing List
Matrix 604 is shipped with following items
1. Matrix 604
2. Artila CD includes SDK, Installation guide and
Remote Display Control software and example programs
Optional Accessory
1.
CB-RJ45F9-150: RJ45 to DB9 Female Cable
2.
CB-RJ2CON-100: Serial Console Cable
3.
DK-35A: DIN RAIL Mounting Kit
4.
PWR-12V-1A: 110~240VAC to 12VDC 1A Power
Adaptor
Matrix 604 Quick Installation Guide
Matrix 604 Layout
USB2.0 Host x2
Reset
USB Port
The USB port is an USB2.0 full speed host port. It can be used
10/100Mbps Ethernet
to expand the storage of Matrix 604. USB client can work with
ActiveSync to exchange file and data between PC and Matrix
9-48VDC Power
604.
Serial Console & GPIO
Reset Button
Press the "Reset" button to activate the hardware reset. Please
always use "reboot" command to reset Matrix 604. You should
only use this function if the software reboot does not function
Power LED
properly.
System Ready LED
Power LED
Ethernet LED
The Power LED will show solid green if power is properly
applied
Ready LED
Serial Port LED
After Power ON, Matrix 604 starts booting. Once system is
boot up, the Ready LED will show solid green.
Link/Act LED
When Ethernet port are connected to the network, Link/Act
will show solid green and if there is traffic in the Ethernet, this
LED will flash
P1/P2/P3/P4
Serial Ports
Serial Port LED
These four dual color LEDs indicate the data traffic at the
serial ports. When RXD line is high then Green light is ON
and when TXD line is high, Yellow light is ON.