DJTECHTOOLS Midi Fighter 3D Podręcznik użytkownika - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów DJTECHTOOLS Midi Fighter 3D. DJTECHTOOLS Midi Fighter 3D 19 stron.
Device Settings
On the left side of the Utility interface are a number of device hardware settings.
MIDI Channel
This sets the base MIDI channel that the Midi Fighter will send and receive MIDI data on. The
Midi Fighter 3D uses 3 channels and the second and third channels will follow the base
channel sequentially.
MIDI Velocity
The Midi Fighter triggers & buttons are not velocity sensitive. This setting sets the default
velocity for Note On messages from the Midi Fighter.
Software Mode
When this option is set to Ableton the Midi Fighter 3D arcade triggers will send both Note &
Control Change messages. This is useful when using the device in Ableton as it allows you to
map momentary control of FX to the arcade triggers, whereas Note On messages will only
provide toggle control. Setting it to Traktor will only send Note messages.
Combos
The Combos check box enables sending of 'Super Combo' MIDI notes. These are special
notes sent only when specific patterns of arcade triggers are pressed, just like an arcade
game. The full details of the super combos are secret, but details can be found on the Midi
Fighter forum!
Sleep Timer
The Midi Fighter 3D can be configured to sleep after a certain period of inactivity. You can
configure the sleep timer to be between 0 and 120 minutes. A setting of 0 will disable sleep.
Pressing any key will wake the Midi Fighter from sleep.
Bank Buttons
When this option is enabled you will gain access to the 4 built in virtual banks. If you decide
to disable it you can set the Bank Buttons behaviour to either hold or toggle.
Bank Side Buttons
The 6 side buttons are fixed and send the same notes regardless of which bank is selected
unless this option is enabled.
Animations
The animations section allows you to configure the various global animations settings for the
Midi Fighter 3D display.
Spark
Spark enables an animation where a burst of sparks shoot across the display with each
press of an arcade trigger.
! 1 2