Alvarion BreezeNET RB Instrukcja szybkiej instalacji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Bezprzewodowy punkt dostępowy Alvarion BreezeNET RB. Alvarion BreezeNET RB 9 stron.

Drukuj stronę

Name

W-

LINK

Status

ETH

SNR

bar

Electronic Emission Notice

This device complies with Part 15 of the FCC rules. Operation is

subject to the following two conditions:

a. This device may not cause harmful interference.

b. This device must accept any interference received, including

interference that may cause undesired operation.

FCC Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits

for a class B digital device, pursuant to EN300385 rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a residential

environment notwithstanding use in commercial, business and

industrial environments. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful

interference to radio communications.

FCC Radiation Hazard Warning

To comply with FCC RF exposure requirement, the antenna used

for this transmitter must be fixed-mounted on outdoor permanent

structures with a separation distance of at least 2 meter from al

persons.

Outdoor Unit LEDs - BU

Description

Wireless Link

traffic

Indication

Self-test and

power

indication

Ethernet

activity/

connectivity

indication

Received

signal

strength

Indication

- 8 -

Functionality

Green – Unit is associated

with an RB

Blinking red – Unit is not

associated

Off – Wireless link is

disabled

Green: Power is available

and self-test passed.

Blinking Amber: Testing

(not ready for operation)

Red: Self-test failed. Fatal

error

Green: Ethernet link

between the indoor and

outdoor units is detected

Red: No Ethernet

connectivity between the

indoor and outdoor units.

Red LED: Signal is too low

(SNR < 4dB).

8 green LEDs: Quality of

the received signal.

Orange LED: Signal is too

high (SNR > 50dB).