Ashly ne1600.10 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Ashly ne1600.10. Ashly ne1600.10 12 stron. Network enabled two channel power amplifiers
Również dla Ashly ne1600.10: Instrukcja obsługi (12 strony), Instrukcja obsługi (16 strony)

Drukuj stronę

Operating Manual - NE Two Channel Power Amplifiers

5) Attenuators - These two dials indi-

cate the physical position of hardware controls

on either the amp front panel or the remote

level control (if present). Note that these will

display the position of attenuators even when

DISABLED in software.

6) Total Attenuation - This indicates the

total amount of attenuation being applied to

the channel. This is the sum

lowing attenuators: main fader, offset link

group attenuation, front panel and remote at-

tenuators (if enabled).

7) Meters - Input and Output meters dis-

play the real time activity per channel, in dB

below rated output. Also, the amplifier's op-

erating temperature and output current are

shown. Output current shows that the ampli-

fier channel is actually delivering output to a

connected speaker load.

The DSP Window

Extensive online help information is available for all DSP blocks. Look in the Protea

Contents and Index/Contents/Protea NE Products/NE Amplifiers/DSP Control for details of all DSP functions. The key

features include:

1) Input Channel Number - Right click on this to bring up Clear, Copy, Link, and Sub Preset functions for that

input channel.

2) Input Channel Name - The user can name each input channel.

3) Input Mute Button - Mutes the input.

4) Pluggable Input DSP Tools - Six boxes are available for custom configuration of pluggable DSP processing

blocks. Available DSP blocks include Dynamics controls, Gain and Remote Gain functions, Graphic and

Parametric EQ, Crossover functions, Delay, Metering, and a Signal Generator.

5) Input/Output Matrix Router - Any input can be routed to any or all outputs. Click and drag from the input to

output to assign routing. To delete a route, right click on the routing line and delete.

of the fol-

Protea

Two-Channel Amplifier Control Surface

Software Help Menu/