Ashly PE-1800 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Ashly PE-1800. Ashly PE-1800 13 stron. Pe series high performance professional power amplifiers
Również dla Ashly PE-1800: Uwagi techniczne i specyfikacje (2 strony), Instrukcja instalacji i obsługi (2 strony), Arkusz specyfikacji (2 strony), Instrukcja obsługi (13 strony)

Operator Manual – PE Series Amplifiers

Page - 11

Important Safety

Instructions – 2

Introduction - 3

The following graphs are actual measurements from PE-Series amplifiers during typical use.

The PE Series - 4

Physical Description - 5

Installation – 6

Operation – 8

Troubleshooting - 9

Spec Table - 10

Gain vs. frequency, Ch1, Ch2 - (typical performance)

Gain vs. frequency / positions of HPF, Ch1, Ch2

Measurements - 11

Dimensions - 12

Warranty - 13

Phase vs. frequency, Ch1, Ch2

Phase vs. frequency / positions of HPF-Switch, Ch1, Ch2

Output impedance vs. frequency @ 1 Amp RMS injected current

THD+N @ 1 kHz, 8

load vs. input voltage, Ch1, Ch2

(Ch1, Ch2) equivalent 11 m + 2,1 μH

Damping factor into 8 , Ch1, Ch2 equation: damping factor =

THD+N vs. frequency (BW 22 kHz),

loaded impedance / amplifier output impedance

10 dB below clip, 8 , Ch1, Ch2

CCIF difference frequency method (10,5 kHz and 11,5 kHz) vs. input

SMPTE intermodulation distortion (60 Hz and 7 kHz)

level @ 8 , Ch1, Ch2

@ 8

vs. input level, Ch1, Ch2

Common mode rejection ratio (Ch1, Ch2)

Channel separation vs. frequency

@ 10 W / 8

(Ch1 => Ch2, Ch2 => Ch1)