Asko TD70.1 SPO Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Suszarka Asko TD70.1 SPO. Asko TD70.1 SPO 12 stron. Domestic vented tumble dryer

Installation instructions

3. Secure the anti-tip device using the screws

as shown in the picture.

4. Attach the plastic cups for mounting the

tumble dryer's front feet to the washing

machine's top cover. This is essential, as

only when the tumble dryer's feet are resting

in the plastic cups can you be sure that the

tumble dryer is correctly positioned on the

washing machine. Break oﬀ tab A on the cup

ﬁ tted on the right side and tab B on the cup

ﬁ tted on the left side. Then remove the paper

from the self-adhesive surface under the

plastic cups.

5. Fit the plastic cups so that the "tags" marked

with arrows are against the front edge or side

edge of the cover and press them ﬁ rmly onto

the cover. Then break oﬀ the remaining tabs.

6. Push the tumble dryer in under the metal

brackets. At the same time keep the front

edge raised by 7/16" (10mm) to 7/8" (20mm) .

7. Lower the tumble dryer's front feet into the

plastic cups and adjust the tumble dryer to

ensure it is level.

Adjusting the feet

Screw the feet in or out so that the tumble dryer

is both stable and level.

Customer Care Center

1-800-898-1879