ASL INTERCOM PS 430 Manual rápido - Página 4

Procurar online ou descarregar pdf Manual rápido para Sistema de intercomunicação ASL INTERCOM PS 430. ASL INTERCOM PS 430 4 páginas. Pro series single channel remote speaker station
Também para ASL INTERCOM PS 430: Manual do utilizador (9 páginas), Manual do utilizador (14 páginas), Manual do utilizador (11 páginas)

Imprimir página

or electret type. If a headset is connected,

loudspeaker and gooseneck microphone are

disabled automatically.

As an option, an XLR-6 connector can be fitted

for binaural use of the headset (see section 6.0 )

5.0

SIDE PANEL CONNECTORS

LINE connector for channel A & B

LINE connector for channel C & D

6.0

INTERNAL CONTROLS

MIC GAIN trimmers

Inside the unit are two trimmers (located on the

PCB) to adjust the gain of the gooseneck

microphone and the headset microphone

separately. See the PS 430 user manual.

7.0

TECHNICAL SPECIFICATIONS

System Specifications

See the PS 430 user manual

Mic. Pre-amps

gain: 40 - 60 dB (adjustable internally)

presence filter: +6 dB at 5 kHz

power to electret mic: +9 V DC

Speaker Driver Amp: 1.6 Wrms @ 16 Ω

Headphones Driver Amps

max. output level: monaural: 16 Vrms @ 200 Ω

binaural: 2x 10.3 Vrms @ 400 Ω

max. output power: monaural:1.3 Wrms @ 200 Ω

binaural: 2x 0.27 Wrms @ 400 Ω

8.0

WARRANTY

This unit is warranted by ASL Intercom to the

original end-user purchaser against defects in

workmanship and materials in its manufacture for

a period of one year from date of shipment to the

end-user.Faults arising from misuse,

unauthorized modifications or accidents are not

PAGE 4

Quick Guide PS 430 / October 2013 © ASL Intercom BV

GOOSENECK microphone

A limiter prevents the mic pre-amp from clipping

when speaking close into the microphone. The

gooseneck microphone is automatically disabled

if a headset is connected.

These two XLR-5 Line connectors are for

connecting the PS 430 to the intercom party

lines. One connector is for channel A+B, one

connector is for channel C+D.

For linking the XLR-5 sockets to XLR-3 intercom

line connectors, each PS 430 comes with two Y-

cords, having an XLR-5 connector at one end

and two XLR-3 connectors at the other end. On

the Y-cords, the XLR-3 with the white ring corres-

ponds with channel A or C.

For pin assignments of Line connectors #12 and

#13, see the PS 430 user manual.

BINAURAL ROUTING jumpers

Internally placed jumpers determine – for each

channel separately – the routing of the intercom

audio to the left and/or right headset can.

See the PS 430 user manual.

Side Tone Rejection: 0 - 30dB adjustable

Power Consumption PS 430

See the PS 430 user manual

Dimensions & Weight PS 430

width: 283mm / height: 88 mm

depth: 42/48 mm sloping / weight: 1550 grams

0 dBu is defined as 775 mV into open circuit.

ASL reserves the right to alter specifications

without prior notice

For more information see the PS 430 user

manual. Go to www.asl-inter.com. section

'Support' and review the referring manual

covered by this warranty. If the unit is faulty it

should be sent in its original packing, to the

supplier or your local ASL dealer, with shipping

prepaid. A note must be included stating the

faults found and a copy of the original suppliers

invoice.