ASL INTERCOM DANS01 Manual de instalação - Página 11
Procurar online ou descarregar pdf Manual de instalação para Acessórios ASL INTERCOM DANS01. ASL INTERCOM DANS01 12 páginas. Ip65 dynamic ambient noise sensor
Imprimir página
4
Safety and Precautions
Environmental
The temperature and humidity ranges shown in the
specifications for this product must not be exceeded.
This equipment must not be installed in an area that is
subject to a corrosive atmosphere.
When installed in accordance to the instructions in this
document, the unit provides IP65 ingress protection.
ESD Precautions
This product contains static-sensitive devices. Observe
ESD precautions when working on the equipment with
the cover removed.
Electrical Safety
Always replace blown fuses in the supply to this
equipment with the correct type and rating. Ensure
power supply cabling is adequately rated.
Unpacking and Handling
The equipment should be unpacked and inspected
immediately on receipt. If damage has occurred please
advise your carrier or supplier.
This
equipment
!
!
devices that are sensitive to electrostatic
discharge. Please take precautions to
avoid damage to the electronics by static
electricity.
It is advisable to retain the original equipment packing
in the event that the equipment ever needs returning for
service.
Ensure that the name and address of the Authorised
Distributor from whom you purchased the unit is
recorded on the
"Service and
manual for future reference.
DANS01 – Installation Guide
contains
electronic
Warranty" page of this
Issue: 02 complete, approved
Page 11 of 12
Packing for Return for Repair
All electronics assemblies must be
!
!
properly
packed
packing for transport, to prevent physical
and ESD damage.
The filler material used for packing for
!
!
return for repair must be antistatic or
static dissipative, as this may come into
contact with exposed connectors, wiring,
or PCB assemblies. The use of non-
conductive filler material may cause
damage to the electronic assemblies
reducing their operational life, or even
destroying them.
Advice on packing the product for return can be
provided by ASL.
in
ESD
protective